Appier
Note
Depending on the app role assigned, Airbridge users can access the integration features as follows:
Access to all features: Owner and In-house Marketer users
Limited access depending on the access level granted: Agency and Media Partner users
Airbridge supports integration with Appier, including cost integration and agency settings. Owner and In-house Marketer users and authorized Agency and Media Partner users can access Appier campaign data in the Airbridge dashboard.
Navigate to [Integrations]>[Ad Channel Integration] in your Airbridge dashboard and select Appier. In the [Tracking Link] tab, you can create and manage tracking links to measure the performance of your Appier campaigns.
For detailed instructions on creating and managing tracking links in Airbridge, refer to the articles below.
请先完成回传设置
为与广告渠道共享应用内事件和归因结果，必须在将追踪链接嵌入广告前完成回传设置。如果在数据收集开始前未完成回传设置，数据将无法推送至广告渠道。
In the [Attribution Rules] tab, you can configure the lookback window and attribution window for Appier. Click Go to edit page to move to the [Management]>[Attribution Rules] page, where you can edit attribution rules.
For detailed instructions on configuring the lookback window and attribution window, refer to this article.
Follow the steps below to enable cost integration with Appier.
Request the API key from Appier. If measuring the performance of multiple apps, request API keys for each app from Appier.
Submit your Appier API Key to Airbridge to integrate cost data.
1. Navigate to [Integrations]>[Ad Channel Integration] in your Airbridge dashboard. Select Appier.
2. Select the [Cost Integration] tab. Switch on the Appier Cost Integration toggle and click + Add an account.
3. Enter your Appier API Key. Click Done.
Attention
Appier provides the API Key on a company or app basis. If measuring the performance of multiple apps, request API keys for each app from Appier.
4. Once the account information is submitted correctly, the Appier API Key is added to the integrated account list. The status will show “Waiting” for up to 4 hours from the time the account is added and will change to “Active” when data is pulled for the first time.
To disable the integration, switch off the cost integration toggle. No data will be pulled once the integration is disabled. Data already pulled into Airbridge is not affected.
The account information remains saved to Airbridge unless you remove the ad account from the integrated account list. By switching back the toggle on, the cost integration is enabled again with existing account information.
Click the […] icon and click Delete to delete an ad account from the integrated ad account list.
If you want to reconnect the deleted ad account, you need to add the ad account and set up the connection from the beginning.
Upon submitting your ad account information to Airbridge, you can check if the integration is running. The status may show “Waiting” even when the account is successfully added if no data has been pulled yet.
For more details on the integration status and data import schedule, refer to the below.
To ensure accuracy, Airbridge pulls the cost data several times throughout the day.
Frequency: Every 4 hours, 6 times a day starting 3:00 PM (UTC)
Schedule: 3:00 PM, 7:00 PM, 11:00 PM, 3:00 AM, 7:00 AM, 11:00 AM (UTC)
Data pulled: Cost data from the past 7 days, from D-1 to D-7
The last data update time is found under “Last Updated” in the integrated account list.
The integration status shows your cost integration and data update status at a glance.
Status | Description |
|---|---|
Waiting | The ad account is successfully added, but no data has been pulled yet. This status may remain for up to 4 hours. |
Success | The data is being pulled and updated regularly. The last update time is displayed. |
No data | No data has been pulled as the campaign has not run for the past 7 days. |
Failed | The data can’t be pulled due to an error. Some of the most common causes are: |
The data pulled from Appier can be viewed in the Actuals Report and Trend Report using the following metrics and GroupBy options.
Metrics | Description |
|---|---|
Clicks (Channel) | The number of clicks measured by the ad channel |
Impressions (Channel) | The number of impressions measured by the ad channel |
Cost (Channel) | The ad spend spent on the ad channel |
Difference between Clicks and Clicks (Channel) metrics
The Clicks and Clicks (Channel) metrics both indicate the number of ad clicks, but their data collection methods differ.
Clicks: Data collected through Airbridge tracking links
Clicks (Channel): Data provided by Integrated Channels
All metrics with (Channel) in their names reflect the measurement reported by Integrated Channels. This rule applies to Impression and Impression (Channel) metrics as well.
GroupBy | Description |
|---|---|
Channel | The media source of the winning touchpoint |
Campaign | The name of the campaign of the winning touchpoint |
Campaign ID | The unique ID assigned to the campaign of the winning touchpoint |
GroupBy | Description |
|---|---|
Country | The country code for the mobile device |
OS Name | The operating system installed on the mobile device |
GroupBy | Description |
Event Hour | The hour the event occurred in a 24-hour format |
Event Date | The day the event occurred (YYYY-MM-DD) |
Event Year | The year the event occurred (YYYY) |
Event Month | The month the event occurred (MM) |
Event Week | The week the event occurred (WW) |
Event Day of the month | The day of the month the event occurred (DD) |
Event Day of the week | The day of the week the event occurred in three-letter abbreviations |
In the [Postback] tab, you can configure postbacks and determine which in-app events and attribution results to send as postbacks. The data collected with the Airbridge SDK and tracking links enables you to optimize campaigns and make strategic decisions about budget allocation.
For more details on postback settings, refer to this article.
Take note of the items below before proceeding with Appier integration.
The discrepancies in the cost data between Airbridge and Appier may stem from the following reasons.
Airbridge pulls the cost data from the past 7 days, every 4 hours, 6 times a day starting at 3:00 PM (UTC). As the updates are not real-time, there may be data discrepancies between Airbridge and Appier, depending on the time of reporting.
Airbridge and Appier aggregate click data differently. As a result, the Clicks (Channel) metric data, which is the click data imported from Appier through cost integration, and the Clicks metric data, which is the click data collected by Airbridge, are different. In general, the click count of the Clicks (Channel) metric data is larger than that of the Clicks metric data. For more details about the metrics, refer to this section of the article.
The Cost (Channel) metric, which shows your ad spend reported by the ad channel, displays value only when used with specific GroupBys.
Below are the GroupBys that can be used in the Actuals Report to view data with the metric:
Channel
Campaign
Ad Group
Ad Creative
Depending on the data reported, the metric may not display any value even if you use the GroupBys above.
The data pulled via cost integration is provided by the app time zone and app standard currency set within Airbridge.
To minimize data discrepancy, align your app’s currency and time zone settings in your Airbridge dashboard and your ad channel’s dashboard.
Once the cost integration is enabled, the following campaign details are advised not to be edited to avoid any error in pulling data into Airbridge.
Campaign name
Was this page helpful?