> ## Documentation Index
> Fetch the complete documentation index at: https://help.airbridge.io/llms.txt
> Use this file to discover all available pages before exploring further.

# Manage Event Blocking

> With Event Blocking, you can stop collecting specific app or web events from the Airbridge dashboard, without changing your app.

With Event Blocking, you can stop collecting specific app or web events from the Airbridge dashboard, without changing your app. Save Data Points (DP) by blocking events you no longer use in your analysis. You can also hide blocked events from metric and event lists across the dashboard.

In **\[Management]>\[Data Management]>\[Event Manager]** in the Airbridge dashboard, go to the **\[Event Blocking]** tab to set up.

> [!NOTE]
>
> **Note**
>
> Only users with the Owner or In-house Marketer app role can set up Event Blocking and event hiding. Users with any other app role can only view the settings. Depending on your plan, the **\[Event Manager]** menu may not be shown.

## How Event Blocking works

Airbridge blocks events in two places: on the Airbridge server and in the SDK. When you save a blocking setting, the Airbridge server stops collecting the event immediately, and the SDK stops sending the event to the server once it downloads the new setting. Because the Airbridge server and the SDK apply the setting at different times, blocking and unblocking take effect at different speeds.

| **Category** | **When it applies** | **Description** |
| :- | :- | :- |
| Blocking | Immediately after saving | The event is not collected from the moment you save. |
| Unblocking | Gradually | The event is collected again once the SDK downloads the new setting, so the timing differs for each end-user depending on when they next access your service. |

> [!CAUTION]
>
> **Attention**
>
> Airbridge does not collect events while they are blocked. No data is kept for that period, so you cannot view it in reports or raw data even after you unblock the event. Choose the events to block carefully.

## Set up Event Blocking

Decide how Airbridge blocks events, then select the events you want to stop collecting. First, choose the scope in **\[Block scope]** under **\[Event List]**. You can choose individual events only when the block scope is **Selected events**.

| **Category** | **Description** |
| :- | :- |
| Selected events | Only the events you select in the list are blocked. All other events are collected as usual. |
| All events | You cannot select individual events. Airbridge stops collecting every event from your app and website, and also stops collecting any new events that occur after you save. Use this scope during periods when you don't need event data, such as after a seasonal campaign ends. |

### Block all events

1. In the Airbridge dashboard, click **Edit** to the right of **\[Event List]**.
2. In **\[Block scope]**, select **All events**.
3. Click **Save**.
4. In the modal, enter `Confirm`, then click **Block all events**. Airbridge stops collecting all events immediately.

> [!CAUTION]
>
> **Attention**
>
> Setting the block scope to **All events** stops collecting every event, including app installs and app opens. Airbridge does not measure campaign performance and does not add data to your reports, so don't use this scope while you are running campaigns.

### Block selected events

1. Click **Edit** to the right of **\[Event List]**. Checkboxes appear in the leftmost column of the event list.
2. In **\[Block scope]**, select **Selected events**.
3. Select the events to block or unblock. Click the checkboxes in the leftmost column to select events one by one. To select several at once, enter a search term or apply a filter so that the list shows only the events you want, then click the checkbox in the header row.
4. Check the number of selected events at the bottom of the screen, then click **Block** or **Unblock**. **Block** changes the status of the selected events to **To block**, and to **Blocked** once you save the setting. **Unblock** changes the status to **Collecting**. To undo your selections, click **Undo**.
5. Click **Save**. In the modal, check the number of events in **\[To block]**, **\[To unblock]**, and **\[Total blocked]**, then click **Save** again.

> [!NOTE]
>
> **Note**
>
> You can select up to 100,000 events to block. If you select more, you cannot save the setting.

### Change the block scope to selected events

When the block scope is **All events**, **Edit** is not shown, and **Block selected events only** appears below **\[Event List]**. When you change the block scope to **Selected events**, only the events blocked in the list stay blocked, and all other events are collected again. Like unblocking, collection resumes gradually as each end-user next accesses your service.

1. Click **Block selected events only** below **\[Event List]**.
2. In the modal, enter `Confirm`, then click **Block selected events only**. The block scope changes to **Selected events**.

## Hide blocked events

> [!CAUTION]
>
> **Attention**
>
> Hiding blocked events can affect features that use them, such as Reports, Integrations, Raw Data, Custom Metric Manager, and Cohort Manager.

When you block an event, Airbridge stops collecting it, but the event stays in metric and event lists across the Airbridge dashboard because of the data collected before you blocked it. You can hide blocked events from metric and event lists too by turning on the **\[Hide Blocked Events]** toggle.

Event hiding doesn't delete collected data. It removes blocked events from lists where you select metrics or events in the dashboard, such as the following:

* Lists where you select metrics and events in reports
* Event selection in **\[Define conditions]** in Audience Manager
* Event selection in **\[Define conditions]** and **\[Select Events]** in raw data exports
* Metric selection in Custom Metric Manager and Custom GroupBy Manager
* Metric selection in the Overview dashboard

> [!NOTE]
>
> **Note**
>
> Event hiding applies only to events you block individually in the event list. Events you stop collecting by setting **\[Block scope]** to **All events** are not hidden.

### Apply event hiding

1. In **\[Management]>\[Data Management]>\[Event Manager]** in the Airbridge dashboard, turn on the **\[Hide Blocked Events]** toggle on the **\[Event Blocking]** tab.
2. Click **Hide events**. The **In progress** tag appears next to the toggle.

It can take up to 3 hours for all blocked events to be hidden. Once they are, the tag changes to **Applied**.

Until you remove event hiding, newly blocked events are also hidden, and unblocked events appear in the lists again.

### Remove event hiding

Removing event hiding doesn't unblock events, so Airbridge still doesn't collect them.

1. In **\[Management]>\[Data Management]>\[Event Manager]** in the Airbridge dashboard, turn off the **\[Hide Blocked Events]** toggle on the **\[Event Blocking]** tab.
2. Click **Show events**. The **In progress** tag appears next to the toggle.

It can take up to 3 hours for all hidden events to appear again. Once they do, the tag disappears.

## View the event list

The event list shows both the events Airbridge is currently collecting and the events you have blocked, so you can decide what to block next. It also shows events that weren't collected in the last 30 days but still appear in metric and event lists across the dashboard.

| **Column** | **Description** |
| :- | :- |
| Status | Shows whether Airbridge is collecting the event. Displays **Collecting** or **Blocked**. |
| Event | The event category name, such as `Install (App)`. |
| Platform | The platform where the event occurred. Displays `App` or `Web`. |
| Collected (Last 30 days) | The number of events collected over the last 30 days, including the day you access the page, based on your app's time zone. Blocked events show `-`. |

* In the Airbridge dashboard, click the **All**, **Collecting**, or **Blocked** filters above the list to see events by status.
* The count in **\[Collected (Last 30 days)]** is calculated when you view it and kept for one day. If an event you just sent is missing or the count hasn't changed, click **Refresh** next to the filters to reload the event list and the count.
* In the header row, click **\[Status]** or **\[Platform]** to filter the list by that column, or click **\[Event]** or **\[Collected (Last 30 days)]** to sort the list by that column.

## View change history

**\[Last modified]** at the top of the **\[Event Blocking]** tab shows when the blocking setting was last changed and which account changed it. Click it to open **\[Settings]>\[Activity History]** in the Airbridge dashboard with that record selected and the **\[Feature]** filter set to **Event Blocking**. Turning the **\[Hide Blocked Events]** toggle on or off is also recorded in **\[Activity History]**.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.